Welding Wire Straight Wire Drawing Machine

straight line wire drawing machine for CO2 welding wire:

(1) Ф800mm spool pay off stand

(2) LZ8/400 straight line wire drawing machine

(3) tension device

(4)degreasing machine: water circulation+machinery scrubbing+sprinkling+high pressure blowing

(5) Ф630mm spool take up machine

(6) man-machine interface control touch screen

(7)complete set electricity control cabinet

3. main technical parameter and points

(1) Maximum enter-wire strength: ≤1000Mpa

(2) Maximum enter-wire diameter: Ф2.4mm

(3) Minimum enter-wire diameter: Ф0.8/1.0/1.2/1.6mm

(4) Maximum compression rate: 85%

(5) Maximum drawing speed: 20 m/s Normal speed:15-18m/s(Capacity:0.5T/H)

(6) Water consumption and pressure: 5m³/h  Water pressure≥0.2Mpa

(7) Gas consumption and air pressure: 1.0m³/h  Air pressure≥0.6Mpa

(8) Motor: drawing machine and take up machine all adopt 11KW 50HZ AC frequency conversion motor

(9) Reel: ①reel diameter: Ф400mm

②reel material: ZG45-55 steel, spray tungsten carbide hard alloy powder on the working surface, hardness is above HRC60, brightness≤0.4Ra, it is made by Zhengzhou Dayang Thermal Sprayed Company

③ Reel useful life: more than two years, replace freely when wear and tear within two years

④Reel cooling way: using slit-type water cooling inside.

(10) Die box:

① the die box body using welding parts,spray tungsten carbide on guide wheel or guide roll surface.

② die box divided into two kinds Lubrication powder cavity and cooling water cavity(flow water cooling or indirectly cooling)

③ the direction of die box can be adjusted.

(11) Tuning roller:

① Using Pneumatic anti-tension tuning,the tension is adjustable; guide pulley are sprayed with WC, useful life is more than two years. Sensor adopt angular displacement non-contact way, TURCK sensor imported from Germany, make the process of template matching wider, mould can be automatically compensated after wear and tear, and it is difficult to break line.